Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products.
- Tire studs sold separately
- POM-injected handle
- Stainless steel barrel
- Thumb and index finger grips for more comfort and control
- Compatible with studs that have a 3.5mm or smaller shaft
$21.95
- AM5200: specific tool for ACS Crossfire freewheels, fits over both 3/8" and 14mm axles
- AM5201: spanner wrench for Crossfire and universal 4-slot freewheels
- AM5203: specific to Paws, Paws HD, Paws 4.1 and gray Southpaw freewheels. A reinforcement ring inside the prongs allows firm centering and maximum torque. Tool is NOT compatible with CLAWS, SHIMANO, and some other freewheels
- AM5205: universal 4-prong that fit Claws, Fat, Southpaw, Shimano, Dicta, and other 4-slot freewheels
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike..
- For disc caliper repair
- Fits SRAM Guide, Trail, and Avid Code Brakes
$64.00
Essential parts to properly service and maintain all Avid CODE brakes.
- Replacement parts for 2007-2010 CODE brakes
- Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$12.99
Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single-hole "lollipop" design, these tensioners reduce weight and help keep your rear wheel locked in place.
Features:
- New and Improved
- 20mm of Adjustment
- Single Axle Position
- Slotted for Dropout
- ED Black Hardware
- Anodized Finish
Specs:
- Axle Size 10mm (3/8") only
- Material 6061-T6 Aluminum
- Hardware
- Stainless Steel
$29.99
Box One Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel.
When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox.
Features:
- New and Improved
- 45mm of Adjustment
- XO Skeleton Design
- Dual-Sided Adjustment Grid
- Dual-Color Adjustment Block
Specs:
- Axle Size: 10mm (3/8") only
- Material: 7075-T6 Aluminum
- Hardware: Stainless Steel
$8.50
- Set contains 9 CrMo wrenches with satin chrome finish plus ABS T-handles
- 25 degree angle entry offers easy access, even in tight spaces
- Set includes: 2mm—150 x 60mm, 2.5mm—150 x 60mm, 3mm—150 x 60mm, 4mm—150 x 60mm, 5mm—200 x 75mm, 6mm—200 x 75mm, 8mm—200 x 78mm, 10mm—200 x 78mm, T25—150 x 60mm
$11.00
- Tire levers for use on both tubed and tubeless tires and wheels
- Features a curved edge which mates up with wheels, providing more contact
- Designed with both a spoke hook and a rim clip to hold lever in place when needed, preventing slippage
- Includes 3 levers
$12.00
- Metric and Imperial readings up to 3m/10ft in length
- Stainless steel construction with polymer housing
$16.00
- A Y-wrench that features a swivel sleeve that allows the tool to rotate freely around the center point
- Features a magnetic panel to enable fast storage on metallic objects such as a work stand
- Available as: 4/5/6mm hex key, 4/5/6mm ball point hex key, T10/T25/T30mm Torx key, or 2/2.5/3mm hex key
$23.80
The Birzman Housing and Cable Cutter provides great handling comfort and is designed to offer additional leverage strength.
The integrated awl helps restore cut housing ends, clearing the way for smooth cable operation.
$37.40
- Lockring sockets for various E-Bike drive units
- Constructed from CNC machined alloy steel
- 1/2" drive compatible
$60.80
- Easily removes 1 to 1 1/2" headset cups and BB30 as well as PF30 bottom bracket bearings
$84.00
- Set contains 9 CrMo wrenches with satin chrome finish plus ABS T-handles
- 25 degree angle entry offers easy access, even in tight spaces
- Set includes: 2mm—150 x 60mm, 2.5mm—150 x 60mm, 3mm—150 x 60mm, 4mm—150 x 60mm, 5mm—200 x 75mm, 6mm—200 x 75mm, 8mm—200 x 78mm, 10mm—200 x 78mm, T25—150 x 60mm
$125.00
- 1/4" drive torque wrench (3-15Nm) and bit sockets
- Sockets include: 3/4/5/6/8mm hex, T25, and 90mm extension bar
$166.00
- 1/2" drive torque wrench (10-60Nm)
- Features .5Nm adjustment increments and 72 ratcheting teeth in either direction
$13.99
- Freewheel remover for use with single speed 4-key freewheels
- Can be used with a 24mm wrench
- Compatibility: 4-Key
$28.99
- For use on 8-key single speed freewheels
- Tool Type: Freewheel Remover
- Compatibility: 16-22T smallest cog (Gray)
- Compatibility: 13-14T smallest cog (Silver)
$41.45
Contains the fittings and syringes needed for bleeding Campagnolo disc brakes
-Does not include mineral oil
- Fits Brand: Campagnolo
- Hydraulic Fluid Type: Mineral Oil
$214.00
Campagnolo UT-CN400 Chain Tool.
- Used to install 12-speed and 13-speed Campagnolo chains
$272.00
- 11 speed compatible
- Allows removal, installation and peening of rivets
$19.00
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$16.99
Strong and nearly indestructible, this heavy-duty tool provides much more leverage than the weaker, more brittle tire lever. Designed to pull the tire over the rim's bead, it never protrudes into the tire thus avoiding inner tube damage that commonly occurs with tire levers. And the nylon material prevents undesired scratches from occurring to the rims attached to your beautiful wheels. This tool can be used for tires up to 46mm. Made of lightweight, durable, injection molded, fiber reinforced thermoplastic.
$203.04
Service tools to ensure long-term success of Chris King hubs.
- For intensive servicing of Ringdrive system found in most Chris King rear hubs
- Included: Hub Cone Adjusting Tool, Cog Spline Wrench, Spline Driver, Driveshell Bushing Tool, and Service Manual
- Does not fit R-45 model hubs. See TL7829 for proper tool fitting R-45 hubs
$49.99
- Cable Tie Gun quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts, and abrasions to cables
- Automatically cuts off excess strap when the selected tension setting is achieved and saves installation time with one easy pull of the trigger
Page 1 of 39
Next page